12
OPERATION
LOADING A CASSETTE TAPE
1. Take up any slack in the cassette tape by turning the
hub with a pencil to prevent the tape from becoming
tangled in the tape mechanism. Do not touch the
tape.
2. Open the cassette compartment door by lifting it at
the notch. Insert a cassette tape into the door guides
so the cassette’s open edge faces out, the side you
want to play or record on faces the compartment win-
dow, and the full reel is to the left.
3. Close the cassette compartment door.
Illust.
Illust.
14-1119.fm Page 12 Friday, July 2, 1999 3:28 PM
To Next Page
Loading...
