14
2. Set
VOICE ACTIVATION
to
IN
.
3. Press
RECORD
. Recording begins when the voice-
activation mechanism detects a sound.
4. To cause low sound levels to activate recording,
rotate
VOLUME/VOX SENS
toward
MAX
. To automati-
cally record only louder sounds, rotate
VOLUME/VOX
SENS
toward
MIN
. (This does not change the volume
of the recording.) Experiment to achieve the best set-
ting for your recording environment.
The RECORD BATTERY indicator lights during
recording.
Manual Recording
For manual recording, set
VOICE ACTIVATION
to
OUT
,
then press
RECORD
. Recording automatically stops
when the recorder reaches the end of the tape side. To
manually stop recording, press
STOP
.
Illust.
Illust.
14-1119.fm Page 14 Friday, July 2, 1999 3:28 PM
To Next Page
Loading...
