16
USING FAST-F AND REWIND
When the tape is stopped, press
FAST-F/CUE
or
RE-
WIND/REV
to fast-forward or rewind the tape. The
button locks, and the tape fast-forwards or rewinds to the
end or until you press
STOP
. When the tape reaches
the end, press
STOP
to release the button and the
tape-handling parts.
Note:
The CTR-113 does not automatically stop when it
reaches the end of the tape. To protect the tape after the
tape has fully wound to either end, press
STOP
to re-
lease fast-forward or rewind.
USING THE TAPE COUNTER
The tape counter shows you the tape’s current playing
position, making it easier to locate a particular segment.
Before you play a tape, press the reset button to reset the
Illust.
14-1119.fm Page 16 Friday, July 2, 1999 3:28 PM
To Next Page
Loading...
