9
Cautions:
• You must use an adapter that supplies 3 volts and
delivers at least 300 milliamps. Its center tip must be
set to negative, and its barrel plug must fit the CTR-
113’s
DC 3V
jack. The recommended adapter meets
these specifications. Using an adapter that does not
meet these specifications could damage the CTR-
113 or the adapter.
• Connecting a DC adapter automatically disconnects
internal batteries.
• Always plug the adapter into the recorder before you
plug it into the cigarette-lighter socket. Always unplug
the adapter from the cigarette-lighter socket before
you unplug it from the recorder.
Follow these steps to power the recorder from your vehi-
cle’s cigarette-lighter socket.
1. Set the adapter’s voltage switch to 3V.
Illust.
14-1119.fm Page 9 Friday, July 2, 1999 3:28 PM