To Next PageTo Next PageWhat causes line bars or line defects on my Optoma Projector?
If you're seeing line bars or line defects on your Optoma Projector, check if the Formatter Board and the DMD Board are assembled properly. Also, check the Scaler Board, DMD Board, and DMD Chip.
Why is my Optoma Projector's audio abnormal?
If your Optoma Projector has audio abnormalities, ensure that the signal cables and source are working correctly. If the issue persists, check the Speaker Module, Scaler Board, and Formatter Board.
What to do if my Optoma Projector has function abnormalities?
If your Optoma Projector is experiencing function abnormalities, try performing a “Reset (All data)” of the OSD Menu. If problems persist, check the Scaler Board, Formatter Board, and DMD Board.
What causes dead pixels or dust on Optoma EP1080?
If you notice dead pixels or dust on your Optoma Projector's display, ensure the projection screen is free of dirt and that the projection lens is clean. You may need to clean the DMD Chip and Engine Module. Also, check the DMD Chip and Engine Module.
General| Resolution | 1920 x 1080 |
|---|---|
| Zoom | 1.1x |
| Display Technology | DLP |
| Input Lag | 16 ms |
| HDMI Version | 1.4a |
| Contrast Ratio | 20000:1 |
| Inputs | HDMI, VGA, USB |
| Projection Size | 30" - 300" |
