English
2
Usage Notice
Precautions
Follow all warnings, precautions, and maintenance proce-
dures as recommended in this user’s guide.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Reset” function from the On Screen
Display “System-->Lamp Setting” menu after
replacing the lamp module (refer to page 30).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal
sources.
Warning- Do not use lens cap when projector is in operation.
To Next Page
Loading...
