Optoma HD26 - SETUP | Security

44
English
User Controls
SETUP | Security
Security
On: Choose “On” to use security veri cation when the turning
on the projector.
Off: Choose “Off” to be able to switch on the projector without
password veri cation.
Security Timer
Can be select the time (Month/Day/Hour) function to set the
number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again.
Change Password
First time:
Press “ ” to set the password.
The password has to be 4 digits.
Use number button on the remote to enter your new password
and then press “ ” key to con rm your password.
Change Password:
(If your remote does not have a number keypad, please use
the up/down arrows to change each digit of the password,
then press enter to con rm)
Press “ ” to input old password.
Use number button to enter current password and then press “
” to con rm.
Enter new password (4 digits in length) using the number but-
tons on the remote, then press “ ” to con rm.
Enter new password again and press “ ” to con rm.
If the incorrect password is entered 3 times, the projector will
automatically shut down.
If you have forgotten your password, please contact your local
of ce for support.



1.
2.
3.

1.
2.
3.
4.


Pass-code default
value is “1234” ( rst
time).

Security
Security Timer
Change Password
SETUP
Off
Exit
Security
Enter Current Security Code (4 digits)
Incorrect security code. Re-enter again. (Last Try)