To Next PageTo Next PageHow to fix line bar or line defect on Optoma HD70?
If your Optoma Projector displays line bars or line defects, check if the DMD chip and the DMD board are assembled properly. Also, check the DMD board, DMD chip, and main board.
How to resolve poor uniformity or shadow on Optoma Projector?
If your Optoma Projector has poor uniformity or shadows, ensure the projection screen is free of dirt and the projection lens is clean. Confirm the brightness is within specification, replacing the lamp if it's below spec. Also, check the engine module.
How to fix dead pixel or dust on Optoma Projector?
If your Optoma Projector is showing dead pixels or dust (out of spec), ensure the projection screen is free of dirt and the projection lens is clean. You can clean the DMD chip and engine module. Also, check the DMD chip and engine module.
Operating Environment| operating temperature | 5 to 35°C, 80% Max Humidity |
|---|---|
| storage temperature | -20 to 60°C, 80% Max Humidity |
| noise level | 30dB/29dB (STD/ECO) |
Power| power supply | AC Input 100-240V, 50-60Hz |
|---|---|
| power consumption | 250W, <13% at 110V |
| lamp life and type | 2000/3000 (STD/ECO) 200W P-VIP |
Display and Projection| brightness | 1000 ANSI Lumens |
|---|---|
| resolution | Native 720p (1280x720) |
| contrast ratio | 4000:1 in ImageAI Mode |
Ports & Interfaces| I/O connection ports | HDMI, Component Video, S-Video, VGA with Component & SCART Compatibility, Composite Video (RCA), RS-232, Dual IR Receivers, +12V Trigger |
|---|---|
| computer compatibility | SXGA+, WXGA, XGA, SVGA, VGA, VESA Standards, PC and Macintosh Compatible |
| video compatibility | NTSC, PAL, SECAM, HDTV (720p, 1080i), SDTV (480i/p, 576i) |
Weight and Dimensions| dimensions | 10.4” x 3.7” x 10.1” (264 x 94 x 257 mm) |
|---|---|
| weight | 5.6 lbs (2.54 kg) |
| throw ratio | 1.58-1.9:1 (Distance/Width) |
