To Next PageTo Next PageWhat to do if Optoma Projector remote control does not work?
If your Optoma Projector remote control isn't working, first ensure you're within a ±15° angle of one of the IR receivers and no more than 7 meters (23 ft) away. Remove any obstructions between the remote and the projector. Also, verify that the batteries are correctly inserted and replace them if they're depleted.
What happens if my Optoma HD50 gets over temperature?
When the Optoma Projector's internal temperature gets too high, it will automatically switch off.
What happens if Optoma HD50 Projector fan failed?
If the fan fails, the Optoma Projector will switch off automatically.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 1.2 - 10 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9, 16:10 |
| Contrast ratio (dynamic) | 50000:1 |
| Contrast ratio (typical) | - |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -30 - 30 ° |
| Offset | 130 % |
| Throw ratio | 1.39 - 2.09:1 |
| Zoom capability | Yes |
| Focal length range | 20.07 - 31.05 mm |
| Aperture range (F-F) | 2.42 - 2.97 |
| Vertical lens shift range | -15 - 15 ° |
| Lamp power | 240 W |
| Light source type | Lamp |
| Service life of light source | 7000 h |
| Service life of light source (economic mode) | 5000 h |
| Supported 3D formats | Frame packing, Side by side |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 3.58, NTSC 4.43, NTSC J, NTSC M, PAL, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM 4.25/4.4, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA) |
| DVI port | No |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Noise level | 29 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black, White |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 110 - 220 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 270 W |
| Power consumption (economy mode) | 230 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 265.5 mm |
|---|---|
| Width | 286 mm |
| Height | 124 mm |
| Weight | 3800 g |
Important safety instructions and warnings for projector operation.
Warnings and advice to prevent eye damage from projector light.
Details on projector package contents, overview of main unit and components.
Description of all available input and output ports on the projector.
Explanation of the remote control functions and buttons.
Instructions for connecting the projector to various devices.
Step-by-step guide for turning the projector on and off.
Guidance on adjusting image height, position, and size.
Table for adjusting image size based on screen diagonal and distance.
Detailed explanation of remote control functions for projector operation.
How to navigate and use the projector's on-screen display menus.
Detailed menu structure and available settings for image and display.
Controls for image adjustments like brightness, contrast, color, and sharpness.
Settings for aspect ratio, edge mask, zoom, image shift, keystone, and 3D.
Settings related to menu location, lamp life, and projection methods.
Configuration options for language, input sources, HDMI link, and signal.
Solutions for common projector issues like no image, out of focus, or stretched image.
Explanation of LED indicators, messages, and remote control issues.
Instructions and warnings for replacing the projector lamp.
Details on video/computer compatibility, signal types, and 3D.
RS232 pin assignments and command list for projector control.
List of trademarks and instructions for ceiling mount installation.
Optoma office contacts and regulatory/safety notices.
