Optoma HD50 - Setup | Advanced

English
51
User Controls
Setup | Advanced
N
ote
N
ote
When Power Mode
(Standby) is set to
Eco, RS232 will be
deactivated when
the projector is in
standby.
Auto Power O󰘯 (min)
Set the Auto Power O󰘯 interval. The projector powers
o󰘯 the lamp after 30 minutes of no signal by default. The
following warning is displayed 60 seconds before power o󰘯.
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers o󰘯 after
the speci󰘰ed time period of inactivity (regardless of signal).
The following warning is displayed 60 seconds before
power o󰘯.
Power Mode (Standby)

Eco.: Choose “Eco.” to save power dissipation further <
0.5W.

Active: Choose “Active” to return to normal standby.