Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
▀■ Warning- Do not look into the projector's lens when
the lamp is on. The bright light may hurt your
eyes.
▀■ Warning- To reduce the risk of re or electric shock, do
not expose this projector to rain or moisture.
▀■ Warning- Please do not open or disassemble the
projector as this may cause electric shock.
▀■ Warning- When replacing the lamp, please allow the
unit to cool down. Follow instructions as de-
scribed on page 56.
▀■ Warning- This projector will detect the life of the lamp
itself. Please be sure to change the lamp
when it shows warning messages.
▀■ Warning- Reset the "Lamp Reset" function from the
on-screen display "System|Lamp Setting"
menu after replacing the lamp module
(refer to pages 42-43).
▀■ Warning- When switching the projector o, please
ensure the cooling cycle has been completed
before disconnecting power. Allow 90 sec-
onds for the projector to cool down.
▀■ Warning- Do not use lens cap when projector is in
operation.
▀■ Warning- When the lamp is approaching to the end of
its life time, the message "Replacement sug-
gested" will show on the screen.
Please contact your local reseller or service
center to change the lamp as soon as pos-
sible.
To Next Page
Loading...
