Do you have a question about the Optoma HD91 and is the answer not in the manual?
display technology | Single 0.65" DC3 DMD |
---|---|
native resolution | HD (1920 x 1080) |
maximum resolution | WUXGA (1920 x 1200) |
brightness | 1000 lumens |
contrast ratio | 500, 000:1 |
displayable colors | 1.07 Billion |
lamp life and type | 20, 000+ hours LED |
keystone correction | ±30° Vertical |
uniformity | >85% |
offset | ±60% Vertical, ±10% Horizontal |
aspect ratio | 16:9 Native, 4:3 compatible |
throw ratio | 1.5–2.89 |
projection distance | 4.3’–56.1’ |
image size | 30”–300” |
projection lens | F=2.3~3.39, f=22.56~42.87mm |
noise level | 23dB |
operating temperature | 41–104°F (5–40°C) |
---|---|
humidity | 85% max |
power supply | AC Input 100–240V, 50–60Hz |
---|---|
power consumption max | 250 Watts |
power consumption min | 120 Watts |
power consumption standby-ECO | <0.5W |
weight | 15.4 lb (7 kg) |
---|---|
dimensions | 13.6” x 17.4” x 6.4” (345 x 443 x 161.5 mm) |
computer compatibility | WUXGA, HD, UXGA, SXGA+, WXGA, SXGA, XGA, SVGA, VGA resized, VESA, PC and Macintosh compatible |
---|---|
video input compatibility | NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) |
3D compatibility | Supports all HDMI 1.4a mandatory 3D format, side-by-side format and top and bottom format |
vertical scan rate | 24–85Hz, 120Hz–144Hz |
horizontal scan rate | 15.375–91.146KHz |
i/o connection ports | Two HDMI 1.4a, VGA-in, component, composite video, USB-A (power), RS-232C, two 12V triggers, 3D VESA port |
---|
General safety warnings and instructions for projector operation.
Warnings and precautions for safe projector operation.
Procedures for turning the projector on and off.
How to navigate and use the projector's OSD menus.
Detailed explanation of image adjustment options like Brightness and Color.
Common problems and solutions for projector issues.