Optoma UHD550X User Manual

English
37
USING THE PROJECTOR
Background Color
Use this function to display a blue, red, green, gray color, or none when no signal is available.
HDMI 2 Setting
Congure the HDCP2.2-compatible HDMI 2 connector settings.
 EDID 1: For 480i/p, 576i/p, 720p, 1080i/p, or 2160p input signal.
 EDID 2: For non-interlaced signals only.
HDMI 1 EQ
Set the HDMI port EQ value for HDMI1.
HDMI 2 EQ
Set the HDMI port EQ value for HDMI2/MHL.
Setup reset OSD menu
Reset OSD
Return the factory default settings for OSD menu settings.
Reset to Default
Return the factory default settings for all settings.
Network menu
Network LAN menu
Network Status
Display the network connection status (read-only).
MAC Address
Display the MAC address (read-only).
DHCP
Use this option to enable or disable the DHCP function.
 On: Projector will obtain an IP address automatically from your network.
 Off: To assign IP, subnet mask, gateway, and DNS conguration manually.
Note: Exiting OSD will automatically apply the entered values.
IP Address
Display the IP address.
Subnet Mask
Display subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
DNS
Display the DNS number.

Optoma UHD550X Specifications

General

Brand	Optoma
Model	UHD550X
Category	Projector
Language	English