Mechanical Installation 49-
3.5.3 Laminar air purge for CoolingJacket
Laminar air purge for front mounting of the
CoolingJacket Advanced (Standard and Extended).
Two different versions are available: One for
standard IR camera applications [Part-No.:
ACCJAAPLS] and the other for line scanning
applications [Part-No.: ACCJAAPLL].
Those two versions are fitting to all focusing units
with production date ≥01/2018. A protective window
(67 x 3 mm) has to be ordered separately. If you like
to mount the air purge on an older CJ, the focusing
unit should be exchanged to the current version.
To Next Page
Loading...
