Opus OP2 - OP2 Set-Up Procedure; Prepare to Deploy Camper; Swing Down Spare Tire

14
PREPARE TO DEPLOY YOUR CAMPER
• Once you have positioned your OPUS® in the desired location, engage the handbrake.
• Raise or lower the tongue jack wheel to level your OPUS® length ways.
• Remove all items from the Cargo Rack.
• Un-clip the securing latches on the passengers side.
• On the drivers side remove locking pins and unfold the Cargo Rack and secure the locking pins back in place.
SWING DOWN SPARE TIRE
• Un-clip the spare wheel carrier using the blue spring levers.
• Carefully swing down the spare tire.
• Take care to support the weight of the spare wheel carrier so that it does not swing free and fall whilst out of control.
OP2 SET-UP
STEP 1
STEP 2