29
8. Burn the image, copy the USB raw image file to the USB device. In the example,
the USB device is identified as dev/sdd. This command requires root access and
is prefixed with “sudo”.
sudo cp
d6000v1_OS_7_0_1_0_0_GA_02282020_OS_52_GA_05022019_R8_2_1_0_0_GA_01282020
.raw /dev/sdd
9. The USB burn process on a USB3 device can take 15 minutes. It may take a
longer time if the device or port is USB2. After the process is complete, you can
remove the USB. It is ready for use.
To Next Page
Loading...