ORANGE CR60C - Rear Panel Features; Speaker Jack Sockets; Footswitch Jack Sockets; Effects Loop (Send and Return)

4
CR60C
E
N
G
L
I
S
H
REAR PANEL FEATURES
15. Speaker Jack Sockets (16 Ohm, 16 Ohm)
Please refer to “Using Your Amplifier”
16. Channel Footswitch jack socket
Use any latching footswitch to change channel using this socket.
17. Reverb footswitch jack socket
Use any latching footswitch to switch the reverb on and off.
18. Effects Loop (Send and Return)
Use the “Send” jack socket to go to the input of time based effects pedals or rack equipment
such as delay, chorus, etc. Use the “Return” jack socket to return from the output of the effects
being used.
(Note – Effects such as overdrive, fuzz, wah wah, tuner, etc, are probably best placed between
the instrument and the input of the amplifier)