37
• Configure your camera
Go to Camera. Press the icon on the bottom left corner to configure your
camera:
♦ Switch to video recorder: Switch to record video mode.
♦ Image viewer: Enter Image viewer to view the photos you’ve just taken.
♦ Camera settings: Set LED highlight, Shutter sound, EV, Contrast, Anti-flicker,
Delay timer, and Cont. shot.
♦ Image settings: Set Image size and Image quality.
♦ White balance: Select Auto, Daylight, Tungsten, etc.
♦ Scene mode: Select Auto or Night.
♦ Effect settings: Select Normal, Greyscale, Sepia, etc.
♦ Storage: Select Phone or Memory card.
♦ Restore default: Restore to factory default settings.
• Take a video
Go to Video recorder to record a scene.
Aim the camera at the subject and then press the Camera key to start, press
it again to pause, and tap the icon on the bottom right corner to finish recording.
Before recording a video, adjust brightness and zoom to the right size.
To Next Page
Loading...
