Need help?Do you have a question about the ORANGE TH100 and is the answer not in the manual?
General| Power Output | 100 Watts |
|---|---|
| Power Tubes | 4 x EL34 |
| Effects Loop | Yes |
| Reverb | No |
| EQ Controls | Bass, Middle, Treble |
| Channels | 2 |
| EQ | 3-band |
| Inputs | 1 x 1/4" Instrument |
| Outputs | Line Out |
| Dimensions | 28 cm |
| Preamp Tubes | 4 x ECC83 (12AX7) |
Contact details for Orange Amplification in the UK, including address and email.
Contact details for Orange USA, including address, phone, fax, and email.
Explanation of lightning flash with arrowhead and exclamation point symbols indicating dangerous voltage and important instructions.
Essential safety guidelines: keep instructions, heed warnings, follow instructions, avoid liquids, and clean with dry cloth.
Instructions on proper ventilation and avoiding installation near heat sources for safe operation.
Information regarding polarized plugs, grounding, and consulting an electrician for outlet replacement.
Guidance on servicing, referring to qualified personnel, and conditions requiring service.
Ensuring replacement parts match manufacturer specifications to avoid hazards.
Conformance to UL Standard 60065 and certified to CAN/CSA-C22.2 No. 60065-03.
Compliance with FCC Rules Part 15, regarding harmful interference and operation.
Instructions for selecting the correct mains voltage and fuse for your region (115/120V or 230V).
Guidance on connecting the amplifier to speaker cabinets with correct impedance (16ohm, 8ohm).
Steps for connecting to mains supply and setting the output switch to Standby before powering on.
Explanation of Volume, Bass, and Treble controls for the clean channel.
Details on Gain, Shape, and Volume controls for the dirty channel.
Description of the channel switch and its interaction with the footswitch.
Information on the footswitch jack socket for channel switching.
Explanation of the output switch functions (low plate voltage, standby, higher plate voltage).
Details on the 2/4 output tubes switch and its effect on impedance.
Table showing output wattage (35W, 70W, 50W, 100W) based on output switch and tube configuration.
Details on using the effects loop send and return jack sockets with external equipment.
Lists the types and quantities of valves used in the pre-amp, effects loop, and output stage.
Information regarding the HT fuse and when to contact a service technician.
Recommendations for periodic valve replacement and professional bias checking for valve amplifiers.
Information on fuses protecting against valve failure and voltage issues, and the recommendation for spare parts.
Link to the Orange Amps website for more information on maintenance, accessories, and spares.
Details on the one-year standard warranty and how to obtain an additional year by registering.
Information on the 90-day warranty coverage for valves and speakers.
Instructions to register the product online at www.orangeamps.com to ensure warranty coverage.
To Next Page