10
MAINTENANCE + USAGE
troubleshooting
Oransi puriers are designed to be trouble free.
However, if your air purier won’t turn on, repeat
the Filter Replacement steps to make sure the
lter is properly installed and that the base is
completely closed and locked. Your air purier has
a safety feature that turns power o if the lter
and cover are not properly in place.
using your Oransi
Always operate your air purier indoors on a level surface.
Locate your air purier wherever you spend most of your time. Typically, a bedroom
or living space. Set the fan speed to a level that is comfortable for you. Low settings
are less audible. In most cases you can run your air purier on a very low fan.
For a larger living area, consider a higher fan speed when you’re absent and then
turn the setting lower when you return to spend time in the room.
Air enters your Oransi at the bottom and exits the top, so you can place the unit
anywhere in a room. However, be careful that curtains do not block air intake or exit.
To Next Page
Loading...
