EasyManua.ls Logo

Orban 8182A - Page 3

Orban 8182A
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT SAFETY
INSTRUCTIONS
All the safety and
operating instructions
should
be
read before the
appliance is operated.
Retain
Instructions:
The safety and
operation instructions should be
retained for future
reference.
Heed
Warnings: All
warnings on the
appliance and in the operating
instructions should
be adhered to.
Follow Instructions:
All operation and user
instructions should be
followed.
Water and
Moisture: The
appliance should not
be used near
water
(e.g.,
near a
bathtub, washbowl, kitchen sink,
laundry
tub,
in a wet
basement, or
near
a
swimming
pool, etc.).
Ventilation:
The appliance
should be situated so that its
location or position
does not interfere
with its proper ventilation. For example,
the
appliance should not be
situated on a
bed, sofa, rug, or
similar surface that may
block the
ventilation openings; or, placed in a
built-in
installation, such as a
bookcase or cabinet
that may impede the
flow of air through the
ventilation
openings.
Heat:
The appliance should
be situated away
from heat sources such as
radiators, heat
registers, stoves,
or
other
appliances (including
amplifiers) that produce
heat.
Power
Sources:
The
appliance should be connected to
a power
supply only of the
type described in the operating
instructions or as
marked on the
appliance.
Grounding or
Polarization:
Precautions
should be taken so
that the
grounding or
polarization means of an appliance is not
defeated.
Power-Cord
Protection:
Power-supply cords
should be routed so that
they are
not likely to be walked on or
pinched by items placed
upon
or against them,
paying
particular attention to
cords at plugs,
convenience
receptacles, and the point where
they exit from the
appliance.
Cleaning:
The
appliance should be
cleaned only as
recommended by the
manufacturer.
Non-Use
Periods:
The power
cord of the appliance
should be
unplugged from the
outlet when left unused for a long
period of time.
Object
and
Liquid Entry:
Care
should be taken so that
objects do not
fall and
liquids are not spilled into the
enclosure through
openings.
Damage
Requiring
Service:
The appliance should
be serviced by
qualified
service
personnel when:
The
power supply cord or
the plug has
been damaged; or
Objects have
fallen, or liquid
has been
spilled into the appliance;
or
The appliance
has been
exposed to rain;
or
The
appliance does not
appear to operate
normally or exhibits
a
marked change
in
performance; or
The
appliance has
been dropped,
or
the
enclosure damaged.
Servicing:
The user
should not attempt to
service
the
appliance beyond
that
described in the
operating instructions. All other
servicing
should
be referred to
qualified
service personnel.
The
Appliance
should be used
only with
a
cart or stand
that is
recommended by
the manufacturer.
Safety
Instructions
(European)
Notice For
U.K.
Customers If Your Unit Is
Equipped With A
Power Cord.
WARNING:
THIS
APPLIANCE MUST BE EARTHED.
The cores in
the
mains
lead are coloured in accordance with the
following code:
GREEN
and YELLOW
-
Earth BLUE
-
Neutral
BROWN
-
Live
As colours
of the cores
in
the mains
lead of this appliance may not
correspond
with the coloured
markings identifying
the terminals in your
plug,
proceed
as
follows:
The
core
which is coloured green and
yellow must be connected to
the terminal in the
plug marked
with the letter
E,
or with
the earth
symbol,
(4.),
or
coloured
green, or green and
yellow.
The
core which is coloured
blue must be connected to the
terminal marked N
or coloured black.
The core
which
is coloured
brown must
be connected
to the
terminal
marked L or coloured
red.
A
The power cord is
terminated in a CEE7/7 plug
(Continental Europe).
The green/yellow
wire
is connected directly to the unit’s chassis. If
you need
to
change the
plug
and if you are qualified
to
do
so, refer to the table
below.
WARNING: If
the ground is defeated, certain
fault conditions in the unit
or in the system to
which
it is connected can
result in full line
voltage between
chassis and earth ground. Severe injury or death
can then result if the chassis and earth ground are
touched simultaneously.
CONDUCTOR
WIRE
COLOR
Normal
Alt
L
LIVE
BROWN BLACK
n
NEUTRAL BLUE
WHITE
E
EARTH GND
GREEN-YELLOW
GREEN
AC
Power Cord Color
Coding

Related product manuals