What to do if I lost the security passcode on my Orban Optimod-AM 9200 Processor?
If you've lost the security passcode for your Orban Processor, here's what you can do: * First, turn off the system by unplugging the power cord. * Next, press and hold the Setup and Escape buttons at the same time. While keeping both buttons pressed, power up the unit. * Then, press either RESTORE NRSC or RESTORE NON-NRSC, depending on your country's government standards.
HF presets designed for international shortwave broadcasting, offering optimized sound for various conditions.
Provides separate day and night positive peak settings for optimal fidelity and coverage.
Covers programming passcodes, local lockout, unlocking the unit, and troubleshooting lost passcodes.
Adds GREGG and PRESENCE presets for different programming needs.
B1/B2 XO control for multiband compressor crossover adjustment.
Enables remote control via LAN/WAN/Internet using PC Remote software.
HF presets designed for international shortwave broadcasting, offering optimized sound for various conditions.
Provides separate day and night positive peak settings for optimal fidelity and coverage.
Covers programming passcodes, local lockout, unlocking the unit, and troubleshooting lost passcodes.
Adds GREGG and PRESENCE presets for different programming needs.
B1/B2 XO control for multiband compressor crossover adjustment.
Enables remote control via LAN/WAN/Internet using PC Remote software.
To Next Page
General
