QUICKSTART GUIDE RISE · RISE 202112 | ORBEA ORBEA | 13
EN
ENABLING ORBEA RS TOOLBOX
IN YOUR DEVICE
After downloading and unlocking Toolbox through Garmin
Express (PC or Mac) or Garmin Connect (smartphones)
and synchronizing your Garmin unit, activate the visuali-
zation of the data elds in your device.
Below is shown the method to see the Toolbox data eld
on both Garmin Edge and watches compatible units.
1. Turn on your Rise and the unit you have installed Orbea
RS Toolbox on, they will pair automatically.
2. Access Activity Proles from the Settings menu in your
device and choose the prole you want to use Rise with.
3. Select “Data Fields” and the page of the activity pro-
le on which you want to see the data from your Rise.
Enable the data page and choose to see one data eld
on the page.
Garmin Edge units
Garmin watches.
Garmin Edge units
Dispositivos Garmin de pulsera
4. Scroll through the data to be seen on the screen. Select
Connect IQ and choose Orbea RS Toolbox.
If you had not connected your Rise before setting up
Toolbox on your device, the unit will show the messa-
ge “Searching…” after selecting the Orbea RS Toolbox
data eld. When you turn on your bicycle and access
the page where you chose to see Toolbox, the data from
your Rise will be visible.
5. With Rise turned on, access the activity prole on which
you selected to see the data from Toolbox or start re-
cording an activity on this prole with your Garmin unit.
Navigate to the page you selected to see Toolbox on to
access the real-time data from your Rise.
Garmin Edge units
Garmin Edge units
Garmin watches.
Garmin watches.
Garmin watches.