To Next PageTo Next PageWhy do stations turn on when they are not supposed to on my Orbit Timer?
If stations on your Orbit Timer are activating unexpectedly, the issue might be due to excessive water pressure, more than one programmed start time, an incorrect AM/PM setting, or the activation of the B program.
Why do valves continue to turn on and off when they are not programmed on Orbit 57876?
If the valves on your Orbit Timer are turning on and off erratically outside of the programmed schedule, the cause might be: * Multiple start times programmed with overlapping schedules. * Excessive pressure. * The B program is activated.
General| Power Source | Battery |
|---|---|
| Material | Plastic |
| Watering Frequency | 1 to 7 days |
| Frequency | 1 to 7 days |
| Connection Type | Hose thread |
| Battery | 2 AA |
| Color | Black |
Identifies the dial, digital display, and battery compartment of the timer.
Lists necessary tools and guidelines for selecting an installation location.
Step-by-step instructions for physically mounting the timer to a wall.
Instructions for wiring the timer to sprinkler valves and common wires.
How to connect power via transformer and activate the backup battery.
Explains the use of two independent programs (A and B) and primary programming.
Guide to setting the current time of day and date on the timer.
How to set the desired time for watering programs to begin.
Setting run times for stations and configuring watering frequency.
Details on setting watering by days, intervals, or odd/even dates.
Guidance on how to review or modify existing watering schedules.
How to temporarily pause watering for 24, 48, or 72 hours.
Instructions for manually activating watering for specific stations or all stations.
Steps for connecting an external rain sensor and using the bypass switch.
Detailed steps for inserting and replacing the timer's backup battery.
