Step five:
A. Connect the pulse wire (74) and extension wire (73) with the wires of the computer (70), and
then lock the computer (70) into the bracket of handlebar (2) with screw (71).
B. Lock the left swing tube cover (52a/b) and right swing tube cover (39a/b) into the swing bar
(5L/R) with screw (25).
C. Lock the pedal bar cover (49L/R) on the connect place of the swing bar (5L/R) and pedal bar
(9L/R) with screw (24&25).
D. Lock the roller cover (50) into the Roller bracket (7) with cross taping screw (24).
To Next Page
Loading...
