Orbit Reader 20 – User guide Version 1.8
Orbit Research Confidential and Proprietary Information 45
1. Start or restart JAWS.
2. Insert + J to bring up JAWS menu.
3. Press Enter on Options.
4. Down Arrow to Braille and press Enter.
5. Tab to Add and press Enter.
6. Arrow Up or Down to Aph Refreshabraille 18 and press Space to check the box
and select it.
7. Tab to the Next button and press Enter.
8. Select USB.
9. Tab to the Next button and press Enter.
10. Select Aph Refreshabraille 18 as primary device.
11. Tab to the Finish button and press Enter.
12. Restart JAWS.
Alternate Steps for Bluetooth Connection:
1. Press Space + Dots 4 7.
2. Follow steps 1-7 of USB connection.
3. Select the COM port where the Orbit Reader 20 is connected (check device
manager for COM port or use COM port you saved from previous steps).
4. Follow steps 9-12 of USB connection.
To turn off braille support, follow these steps:
1. Insert + J to bring up JAWS menu.
2. Press Enter on Options.
3. Down Arrow to Braille and press Enter.
4. Up Arrow to No Braille Display.
5. Tab to Ok and press Enter.
6. Restart JAWS.
Note: For a longer description of any of the following commands, turn JAWS
keyboard Help ‘on’ by pressing Insert + 1 and type the command. Quickly type
the command twice to get an even longer description. Press Insert + 1 again to
exit JAWS keyboard Help mode.
17.12.4.1 Jaws Commands
To Next Page
Loading...