Operation Manual
CompactDual – Two in One
© 08/2019 Rev 0 / Subject to change without notice! Page 37/53
Changing all parameters is done exactly in the same way as described several times. Use
the arrow keys to move to the field and press the confirmation key to change the data again,
using the arrow keys.
There is a second setting option in tack mode. It is called "Tack + Weld". That is, the weld
head tacks on its own (as seen in this picture) 6 times on the pipe circumference (360°). This
makes sense e. G. with an open weld head, when winding the hose package. Then the
welding process starts automatically.
To activate the different options, press the button several times. With this button, you can
scroll through all the functions.
To Next Page
Loading...