Operation Manual
CompactDual – Two in One
© 08/2019 Rev 0 / Subject to change without notice! Page 7/53
4. The buttons
Start-Button: With this butto
n you can start the welding process and confirm the
menus.
Stop Button: With this button you can stop the welding process or undo a menu
selection.
Program Button: With this button we reach the Main Menu. Here you can,
among other, create welding programs.
With the "arrow key left" you can "scroll" through the menus. You can also scroll
through the steps of program creation or browse through already existing
welding Programs in the library. Outside the Programming functions, this key
also serves to rotate the weld head, direction of rotation left. Furthermore,
parameters can be changed.
With the "arrow key up" you can "scroll" through the menus. You can also scroll
through the steps of program creation or browse through already existing
welding Programs in the library. Outside the Programming functions, this key
also serves to rotate the weld head, direction of rotation right. Furthermore,
parameters can be changed.
This key is mainly used to confirm the individual menus and
settings. In the main screen, this button can be used to adjust the welding
current as a percentage. Furthermore, the key is also an ENTER confirmation
To Next Page
Loading...