Operation Manual
CompactDual – Two in One
© 08/2019 Rev 0 / Subject to change without notice! Page 43/53
Wire speed with high current
Wire speed with base current
In the programming in sector 1, a help function is integrated. Herewith, we try to
protect you from any mistakes (that's why sector 1 is so detailed):
If you change the speeds (rotation and wire) and the pulse times (in sector 1), all
values (except currents) in all other programmed sectors will be overwritten.
However, if you want to enter other parameters, such as wire speeds, you can enter
them in the other sectors without setting them in all sectors.
To Next Page
Loading...