Orcam READ - Page 19

● Enabling this feature means that OrCam Read will announce
“Suspended” and “Waking up” upon automatic suspension of the
device and subsequently awakening the device.
● Disabling this feature means that OrCam Read will make a double
beep sound without announcing “Suspended” or “Waking up” upon
automatic suspension of the device and subsequently awakening
the device.
● You may enable or disable the feature here.
○ Reset User Settings
■ You will be able to reset all of the user settings back to the default
settings. Any learned products or faces will be permanently deleted.
○ Change Camera Light Compatibility
■ Here you may change the Flicker Rate to either 50 or 60 Hz depending on
your region. It is recommended to choose the setting based on your
location.
■ If you do not know the Flicker Rate of your location, we recommend
changing the country settings of your device in the Country Settings
Menu.
○ Enable or Disable Light Conditions Notification
■ Light conditions notification will test if there isn't enough light for the
device to work and tell you so.
■ You may enable or disable the feature here.
○ Enable or Disable the Laser
■ The laser pointers, both the border laser frame and the mouse laser
pointer, are designed to help you focus your OrCam Read on any desired
text.
■ You may disable or enable the laser indicator light here.
○ Enable or Disable Automatic Flash
■ Automatic flash will turn on the device lights in case you point or touch
and there isn't enough light for the device to work.
■ You may enable or disable the feature here.
○ Enable or Disable Vocal Commands
■ OrCam vocal commands can be used to easily control your OrCam Read,
change settings, and receive information.
■ You may enable or disable the feature here.
○ OrCam Contact Information
■ You can retrieve OrCam’s contact information here.
○ Reset Installation Retries
■ If you have failed to upgrade your device, this feature will allow you to
reset your device in order to successfully upgrade without losing your
learned data.
○ Device Serial ID
■ You can retrieve the device’s serial ID with this option.