■ You may also set the reading language to “Automatic Detection” in which
the device will automatically detect and read text in any of the installed
languages.
● Country Settings Menu
○ Device Country Menu
■ Setting the country will change some parameters and settings, such as
the time zone, time, and flicker rate of your device, so it can perform
better within the chosen country. Your device will restart upon exiting the
audio settings menu.
■ Note: Changing the country will not change settings such as reading and
system languages.
● Connectivity Settings Menu
○ Bluetooth Settings Menu
■ Connect to a Bluetooth audio device
■ Retrieve the name of the connected Bluetooth audio device
■ Disconnect from the connected Bluetooth audio device
■ Forget all Bluetooth audio devices
○ WiFi Settings Menu
■ Connect to a WiFi Network using the QR code
■ Retrieve the name of the connected WiFi
■ Remove all WiFi networks
■ Check the status of the internet connectivity
● General Settings Menu
○ Voice Menu
■ Change the voices of each language.
○ Set Time
■ The device will announce the current time and date. You will be able to
change the timezone, year, month, day, hour, and/or minute of the time
and date here.
○ Set Automatic Suspend Time
■ Automatic suspend time determines the time to wait in an idle state before
going to Suspend mode. You may set the time to between 2 minutes and
30 minutes.
○ Feedback Sounds Menu
■ Enable or Disable Processing Sounds
● Processing sounds indicate the device is processing the captured
images.
● You may enable or disable the feature here.
■ Enable or Disable Announcements on Automatic Suspend and Resume
● These announcements indicate whether the device will announce
“Suspended” and “Waking up” or make a double beep sound upon
automatic suspension of the device and subsequently awakening
the device.
To Next Page
Loading...