Oreck SurfaceScrub FK40100 Series - Unit Not Picking Up or Low Suction; Brushes Will Not Spin

Problem Resolution
Unit will not pick up or
has low suction
Brushes will not spin
• Empty recovery tank, remove any debris from ffiifififilter. If washing ffiifififilter allow
24 hours to fully dry before reffiifififitting.
• The recovery tank has an automatic shut off to prevent the tank from
overffllowing. If this is activated, the machine will not pick up and the sound
of the motor will change. The recovery tank will need to be emptied.
• Make sure the recovery tank and nozzle are locked into place.
• Mode selector switch is set to DRY mode, change to WASH.
• Check the brushes for blockages.
21