10
Attach the Adjustable Shoulder Strap
The shoulder strap can be attached to use the vacuum in the
horizontal or vertical position depending on what is most
comfortable for your use.
1. To adjust the shoulder strap length, loosen the straps, and
slide the clip up or down depending on the length you desire.
2. To carry the vacuum in the vertical position: clip each end of
the shoulder strap into the two slots on the sides of the carry
handle.
3. To carry the vacuum in the horizontal position: clip one end
of the shoulder strap into the slot of the carry handle, on the
hose inlet side. Clip the opposite end of the strap into the
slot on the bottom of the vacuum on the hose inlet side.
slide clip
loosen strap
vertical position
horizontal position
To Next Page
Loading...
Need help?
General
