4. MAINTENANCE
CLEARING BLOCKAGES
Remove the hose from the canister. Check
for blockages and remove if necessary.
Reconnect the hose.
Plug in vacuum and turn on. Check hose end for
suction and remove any blockages if necessary.
Remove power nozzle from wand and attach
wand to the hose. Check for suction and remove
any blockages if necessary.
TO REDUCE THE RISK OF PERSONAL INJURY–UNPLUG BEFORE CLEANING OR SERVICING. DO NOT USE SHARP OBJECTS TO CLEAN OUT HOSE AS THEY CAN CAUSE DAMAGE.
WARNING!
To Next Page
Loading...
