Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature is displayed.
Solution:
1) Remove all batteries, reinsert into remote
temperature sensor first, and then into the
indoor temperature station.
2) Place remote temperature sensor closer to the
indoor temperature station.
3) Make sure all batteries are new.
4) Place remote temperature sensor and indoor
temperature station in position so the
straight-line signal is not passing through
more than two or three walls.
Problem: Temperatures do not match if units are
placed next to each other.
Solution: Each temperature sensor is manufactured
to be accurate, under normal conditions, to
within 1 degree plus or minus and; so two
temperature sensors could be as much as 2
degrees different. However, the difference can
be exaggerated further because the temperature
sensors are designed for different working
environments. The indoor sensor is less
11
To Next Page
Loading...
Need help?
General