4. Press and release the "MIN/MAX" button to
set the hour.
5. Press and release the "SET" button to move
to the minute setting.
6. Press and release the "MIN/MAX" button
to set the minutes.
7. Press and release the "SET" button to
activate the clock.
Note: When in 12h mode, there is only a
"PM" display, which appears under "TIME."
If there is no display, then it is in AM mode.
Make sure you set the time accordingly.
III. UNITS OF TEMPERATURE MEASURE
A. SELECTING UNITS OF MEASUREMENT
1. Press and hold the "SET" button for
5 seconds until "12h" or "24h" appears in
the TIME LCD.
2. Press and release the "SET" button again,
"°F" will appear in the TIME LCD.
3. Press and release the "MIN/MAX" button
to shift between °F and °C.
4. Press and release the "SET" button twice to
activate settings.
8
To Next Page
Loading...
Need help?
General