S
Sherri AdamsAug 2, 2025
Why Oreck Vacuum Cleaner does not pick up?
- AAshley PattersonAug 2, 2025
Your Oreck Vacuum Cleaner might not be picking up dirt due to several reasons. The filter bag could be full, or the nozzle or intake pivot may be clogged. A broken or stretched belt, a worn brush, or a clogged bag tube could also be the cause. Additionally, the bag pores might be clogged with fine dust, the impeller fan could be broken, or the revolving brush might not be even at both ends. Check these components and clear any obstructions, replace the filter bag, belt, or contact the Service Center for repair if the impeller fan is broken. Also, check the bearing seal to ensure the words 'Special' or 'Normal' are at each end of the revolving brush.