Why is my Oreck XL2310 Vacuum Cleaner not turning on?
If your Oreck Vacuum Cleaner won't run, ensure it's firmly plugged into the wall outlet. Also, check the electrical source, such as the fuse or circuit breaker, to make sure there is electricity in the wall outlet.
What to do if Oreck XL2310 Vacuum Cleaner doesn't pick up?
If your Oreck Vacuum Cleaner isn't picking up dirt effectively, there could be several reasons: * The filter bag might be full, so replace it. * The nozzle or intake pivot could be clogged; clear any obstructions. * The bag tube might be clogged; clear any obstructions. * The bag pores may be clogged with fine dust; change the bag.
Why Oreck XL2310 revolving brush is not even?
If your Oreck Vacuum Cleaner's revolving brush is not even at both ends, check the brush roll end cards. Ensure that the words 'old' or 'new' match at each end.
What to do if impeller fan is broken in Oreck XL2310 Vacuum Cleaner?
If the impeller fan is broken on your Oreck Vacuum Cleaner, return it to a Service Center for repair.
Explains the polarized plug feature for safety.
Lists available accessories with contact information.
Instructions for locking the handle in an upright position.
Method for neatly storing the power cord.
Guidance on dust bags, belts, lubrication, and general cleaner upkeep.
Instructions for using an optional air freshening tab.
General| Type | Upright |
|---|---|
| Weight | 8 lbs |
| Filtration | HEPA |
| Included Attachments | Crevice Tool, Dusting Brush |
| Cleaning Path Width | 12 in. |
| Height Adjustment | Automatic |
To Next Page
