ATCMini – 8
Operating Elements - MicroSD Card Insertion & Formatting
Insert or remove the MicroSD card only when the camera
is turned off.
When the available memory of MicroSD card is less than 10%, the status indicator ashes
blue.
MicroSD card insertion
1� Insert the MicroSD card until it clicks into place, the metal
contacts should be facing upward.
2�
To remove the MicroSD card, push it further into the camera
and it will spring out from the camera for being pulled out.
MicroSD card formatting
1� Press and hold
to turn on the camera.
2� Press and hold , and to format the MicroSD card.
3� Press after the beep to conrm. The status indicator ashes in blue and red alternately�
4�
When formatting is nished, the camera will give two beeps and the status indicator will
light green�
To Next Page
Loading...
