ATCMini – 7
EN
Operating Elements - Date & Time Setting
1� Create SETTINGS.txt le with Notepad (Windows) or TextEdit (Mac).
2� Type in the predicted time when you insert the MicroSD card in the following format*
YYYY.MM.DD
hh:mm:ss
xxHz
Please note that both lename and the content are case sensitive.
3� Save the .txt le in the root folder of the MicroSD card.
4� Insert the MicroSD card and turn on the ATCMini, the camera will be updated the date and time.
* YYYY = year; MM = month; DD = day;
hh = hour in 24-hour format; mm = minute; ss = second;
xx = local mains frequency (50Hz or 60Hz).
Note on mains frequency
Input the correct local mains frequency. The shutter frequency will match the local mains
frequency to reduce banding and icker effect while recording under certain types of lighting,
such as uorescent or mercury vapour lamp.
If you are uncertain about the local mains frequency, test both 50Hz and 60Hz and choose
the one that produces the best results.
To Next Page
Loading...
