6
GB
Full Range
The comfort indicators will appear on the display when the
following conditions are satisfied:
Indicator Temperature Humidity Shows that the
displays Range Range Current
on the unit Environment
COMFORT 20°C to 25°C 40% RH to Ideal range for
(68°F to 77°F) 70% RH both relative
humidity and
temperature
WET Over Contain excess
70%RH moisture.
DRY Below Contain
40%RH inadequate
moisture
No Less than 40%RH No comment
Indicator 20°C(68°F) or to
More than 70%RH
25°C(77°F)
HOW TO SELECT THE
TEMPERATURE THE UNITS OF
MEASURE
The switch on the back of the Barometer selects between
degrees Celsius and Fahrenheit. To select Celsius units, set
the switch to °C. To select Fahrenheit units, set the switch to
°F.
HOW TO SELECT THE PRESSURE
UNITS OF MEASURE
The switch on the back of the Barometer selects between mb
/ hPa and inHg. To select mb / hPa , set the switch to mb / hPa.
To select inHg, set the switch to inHg.
THE RESET BUTTON
If the unit does not operate properly, use a pointed object to
push the [ RESET ] button once, which is located on the back
of the unit.
To Next Page
Loading...
