Oregon Scientific BAA913HG - Technical Specifications and Compliance; Remote Unit Specifications; Power Requirements; Unit Dimensions

11
GB
- Power
Main unit : use four (4) UM-3 or “AA”
1.5V batteries
Remote sensing unit : use two (2) UM-4 or “AAA”
1.5V batteries
- Weight
Main unit : 306 gm (without battery)
Remote sensing unit : 63 gm (without battery)
- Dimensions
Main unit : 170(L) x 110(W) x 34(T) mm
Remote sensing unit : 92(L) x 60(W) x 20(T) mm
Relative Humidity measurement
Measuring Range : 25% RH to 95% RH
at 25°C (77°F)
Resolution : 1% RH
Remote unit
Temperature measurement
Proposed operating range : -20.0°C to +60.0°C
(-4.0°F to 140.0°F)
Temperature resolution : 0.1°C (0.2°F)
RF Transmission Frequency : 433 MHz
No. of Remote unit : Up to 3 units
RF Transmission Range : 30 meters
Temperature sensing cycle : around 40 seconds
Relative Humidity measurement
Measuring Range : 25 to 95%RH
at 25°C (77°F)
Resolution of Humidity : 1% RH
Barometric Pressure measurement
Pressure measuring range : 795 to 1050mb / hPa
(23.48 to 31.01 inHg)
CAUTION
— The content of this manual is subject to change
without further notice.
— Due to printing limitation, the displays shown in
this manual may differ from the actual display.
— The contents of this manual may not be reproduced
without the permission of the manufacturer.
913hg-e.p65 04/30/2002, 6:00 PM11