To Next PageTo Next Page
Need help?Do you have a question about the Oregon Scientific BAA913HG and is the answer not in the manual?
General| Brand | Oregon Scientific |
|---|---|
| Model | BAA913HG |
| Category | Weather Station |
| Type | Wireless Weather Station |
| Display | LCD |
| Humidity Range | 25% to 95% |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Indoor Humidity | Yes |
| Outdoor Humidity | Yes |
| Weather Forecast | Yes |
| Radio Controlled Clock | Yes |
| Temperature Display Units | °C / °F |
| Wireless Range | 30 meters (100 feet) |
Window for graphical weather forecasts and pressure trends.
Displays current, min/max indoor/remote temperatures and trends.
Shows current, min/max indoor/remote humidity, comfort level.
Displays current or historical barometric readings.
Shows current time, date, and alarm status.
Cycles through indoor and remote sensor readings.
Displays/clears min/max temperature and humidity readings.
Accesses and sets daily alarm and pre-alarm times.
Changes clock display mode and sets time/date.
Shows 24-hr barometric history or enters altitude compensation.
Activates snooze function or turns on backlight.
Adjusts settings values up or down.
Accommodates four UM-3 or 'AA' size batteries.
Selects between mb/hPa or inHg pressure units.
Resets the unit to its default factory settings.
Selects between Centigrade (°C) or Fahrenheit (°F).
Provides a stable stand for the main unit on a flat surface.
Displays current temperature and humidity from the remote unit.
Indicates when the remote unit transmits a reading.
Selects °C or °F for remote temperature display.
Assigns remote unit to Channel 1, 2, or 3.
Resets the remote unit to default factory settings.
Accommodates two UM-4 or 'AAA' size batteries.
Includes wall-mount holder and removable table stand.
Instructions for inserting batteries into the main unit.
Steps for installing batteries and setting channels for the remote unit.
Activates the backlight for five seconds.
Guides through setting time, date, and calendar display format.
Instructions for setting and activating the daily alarm.
Details on alarm sound, snooze operation, and deactivation.
Enables pre-alarm alerts based on temperature changes.
Toggles between indoor and remote sensor temperature/humidity.
Sequentially displays indoor and remote readings automatically.
Troubleshooting for no signals received from remote sensor.
Explains how temperature units are displayed on the main unit.
Displays and clears maximum/minimum recorded temperatures and humidities.
Shows trends as rising, steady, or falling for temp and humidity.
Indicates pressure changes using arrows for rising, steady, or falling.
Predicts weather (sunny, cloudy, rainy, snowy) for 12-24 hours.
Indicates if the environment is COMFORTABLE, WET, or DRY.
Shows current and historical pressure; allows altitude compensation.
Alerts when batteries need replacement for main or remote units.
Options for wall-mounting or using the table stand for the remote unit.
Instructions for wall-mounting or using the table stand for the main unit.
Procedure to restore all settings to factory default values.
Care guidelines to ensure proper unit function and longevity.
Details on operating range and resolution for temperature measurement.
Details for remote unit temperature, humidity, and pressure measurements.
Specifies battery types for main and remote units.
Provides physical dimensions for the main and remote units.
Disclaimers regarding manual content and reproduction rights.
Confirms compliance with R&TTE Directive for radio spectrum use.
States compliance with R&TTE Directive for EMC.
Confirms adherence to safety standards for IT equipment.
Lists directives (Low Voltage, EMC, R&TTE) the product conforms to.
