Oregon Scientific BAR122HGLA - Trend Indicators and Alarms; Temperature, Humidity & Pressure Trend Indicators; Maximum and Minimum Temperature and Humidity; Channel-1 Temperature;Humidity Alarm Setup

TEMPERATURE, HUMIDITY & PRESSURE
TREND INDICATORS_
The temperature-trend, humidity-trend and pressure-trend indicators
show the trends of collected readings. Arrows indicate a rising,
steady or falling trend.
Arrow indicator
'-TEMP-'
^ ■ T EMP^
Temperature
Trend
Rising
Steady
Falling
Arrow indicator
■ -
Humidity Trend
Rising
Steady
Falling
Arrow indicator
LressuJ
LhessurJ
Lressube^
Pressure Trend
Rising
Steady
Falling
Note: If the reading goes above or below the measuring range of the
main unit or the remote unit ( stated in specification), the display
will show “HHH” or “LLL”.
MAXIMUM AND MINIMUM TEMPERATURE
AND HUMIDITY
The maximum and minimum recorded temperature and humidity
readings will automatically be stored in the memory.
To display the maximum and minimum display memory:
1. Select the channel to be checked.
2 Press [MEMORY] once to display the maximum temperature and
' humidity and press [MEMORY] again to display minimum
temperature and humidity. The respective indicators, MAX or MIN
will be displayed.
To clear the memory:
. Press and hold [MEMORY] for 2 seconds.
If you press [MEMORY] now, the maximum and minimum recordings
will have the same values as the current ones until different readings
are recorded.
HOW TO USE CHANNEL-1 TEMPERATURE/
HU MIDITY ALARM _
Upper and lower temperature and humidity limits for Channel-1 can
be set so that an alarm activates when the limits are exceeded.
The high and low temperature and humidity displays are selected
by sequentially pressing [ HI/LO ].
8