11
EN
If you wish to disable the auto-reception feature, press the [ TIME /
] button for three seconds. The radio reception signal [ ] will
disappear. The unit will not respond to radio signals.
To enable the feature again, press the [ TIME /
] button for three
seconds.
The radio reception signal [ ] will start blinking to initiate reception
automatically.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [ MODE/SET ] for three seconds.
The hour digits will blink.
Press [ TIME /
] or [ TIME / ] select the hour. Keep pressing
the button to increase or decrease the value rapidly.
Press [ MODE/SET ] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, current day, month,
display language, weekday and hour offset for the 2nd time zone.
Note: The time and date are displayed in 24-HOUR clock format.
For the language display, you can choose among English (E), German
(D), French (F) and Italian (I). Weekday is in the usual sequence of
Monday through Sunday.
For the 2nd time zone, which is indicated by the ZONE icon, enter
the hour offset using the [ TIME /
] and [ TIME / ] buttons
and the BAR122HGN will calculate the second zone-time
accordingly.
If there is an item you do not wish to change, simply press [ MODE/
SET ] to bypass the item.
When you are done, press [ MODE/SET ] to exit. The display will
return to the mode last chosen.
HOW TO SET AND ARM THE ALARMS
The BAR122HGN has two alarms, ALARM 1 and ALARM 2. They
can be invoked together or independently.
To set an alarm:
1.
Press [ ] once to select ALARM 1 or again to
select ALARM 2.
The last selected time of the alarm will be
displayed. If you have never set the alarm before, the time will be
displayed as 0:00.
2. Press [
] for three seconds. The hour digits will
blink.
-
Strong
-
Weak
-
No signal
-
Receiving
To Next Page
Loading...
