12
EN
3. Enter the hour using [ TIME / ] and [ TIME / ].
4. Press
[ ]. The minute digits will blink.
5. Enter the minutes using [ TIME /
] and [ TIME / ].
6. Press
[ ] to exit. The [ ] icon for the alarm
chosen will be displayed indicating the alarm set above is now
armed.
You can also arm or disarm an alarm by pressing the [AL CLOCK]
button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start off gently
and step up its intensity. Without interruption, the alarm will go off
for a total of two minutes.
If a second alarm goes off when the first alarm is sounding off, the first
alarm will be disabled automatically.
HOW TO STOP AN ALARM
To stop an alarm, you can use either press [ ] or [ AL
CLOCK ] or [ SNOOZE ] button.
Pressing [
] or [ AL CLOCK ] will stop the alarm,
which is still armed and will activate at the set time the following
day.
If [ SNOOZE ] button is pressed to turn off the alarm sound, the alarm
will activate again after 8 minutes.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction, shorter
electronic life span, damaged battery and distorted parts.
4. Do not tamper with the unit’s internal components. Doing so
will invalidate the warranty on the unit and may cause
unnecessary damage. The unit contains no user-serviceable parts.
5. Only use fresh batteries as specified in the user’s instructions.
Do not mix new and old batteries as the old ones may leak.
Always read the user’s instructions thoroughly before operating
the unit.
SPECIFICATIONS
Temperature Measurement
Main unit
Indoor Temperature measurement
Proposed operating range : -5.0°C to +50.0°C
(23.0°F to 122.0°F)
To Next Page
Loading...
