15
EN
The added Remote
sensor is not read by
main unit
Displayed Temperature
and/or humidity data
are different from other
measuring instruments
The weather forecast icon
never changes
Comfort level icon is not
displayed
- Clock time is not
correctly set; and/or
- Reception icon
“Antenna” displays
as “No reception”
Selected Channel is
already used by another
Remote sensor
(1) The measurement
method is different
(2) The area under
evaluation is different or
being influenced by
climate
Batteries of the Main Unit
are being discharged
Temperature and humidity
are out of valid range
The clock radio signal is not
received because:
- Electromagnetic interfer
ence exist, or the Main
Unit is located within re
inforced concrete wall or
shadowed area location
- Orientation of placement
is not at optimum posi
tion for reception of clock
radio signal
Select another free channel via
the Channel switch. Then reset
the Remote Sensor and activate
SEARCH mode in the Main
Unit
(1) Use the same instruments
with consideration of the
tolerance of readings
(2) Place the 2 instruments
very closely for a time
period (no less then 30
minutes), avoiding direct
light and air movements
Replace with mew batteries
Please refer to User’s Manual
- Locate the Main Unit far from
PC, mobile phone etc and
re-locate it near the window
sill. Wait at least 24 hours
(note: during night-time sig
nal is less attenuate particu
larly after raining)
- The clock radio signal is
searched at 1:00, 2:00,
3:00, 9:00, 15:00, 21:00
every day automatically
- To force the signal reception
please refer to instructions
in the User’s manual
Trouble Possible Cause Remedy
To Next Page
Loading...
