Oregon Scientific BAR688HG - Contents; Clock Overview; Front View; Back View

2
EN
INTRODUCTION
Thank you for selecting this Oregon Scientific
TM
Wireless
Weather Station with Temperature / Humidity, Ice Alert
and Radio-Controlled Clock (BAR688HG). This clock
is supplied with a remote sensor (THGN122N) and can
support up to 3 sensors in total (additional sensors sold
separately).
N
O
TE Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
CLOCK OVERVIEW
FRONT VIEW
1. SNOOZE
2. Weather Forecast Area
3. Outdoor Temperature Area
4. Indoor Temperature Area
5. Clock / Alarm Area
BACK VIEW
1. TEMP / HUMIDITY HI / LO : Change settings or
enable / disable hi or lo temperature / humidity alarm
for channel 1
2.
/ : Increase / decrease setting; activate /
deactivate clock reception signal
3. CHANNEL: Switch remote sensor display
4. HEA
T INDEX: Display heat index
5. MODE
: Change settings / display
1
8
9
10
1
1
12
2
3
4
5
6
7
P/N:086L004344-058 REV 1
3/94