Oregon Scientific BAR898HGA - Specifications; Main Unit Measurements; Remote Unit Specifications; Power, Weight, and Dimensions

13
GB
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may
leak.
6. Read this instruction manual thoroughly before operating the
unit.
SPECIFICATIONS
Main unit
Indoor Temperature measurement
Proposed operating range : 23.0°F to 122.0°F
(-5.0°C to +50.0°C)
Temperature resolution : 0.2°F (0.1°C)
Relative Humidity measurement
Measuring Range : 25% RH to 95% RH
at 25°C (77°F)
Humidity Resolution : 1% RH
Remote unit
RF Transmission Frequency : 433 MHz
No. of Remote unit : Up to 3 units
RF Transmission Range : Up to 328 feet (100 meters)
Data sensing cycle : around 40 seconds
Temperature measurement
Display range : 23.0°F to 140.0°F
(-5.0°C to +60.0°C)
Proposed operating range : -22 °F to 140 °F
(-30 °C to 60 °C)
Temperature resolution : 0.2°F (0.1°C)
Relative Humidity measurement
Measuring Range : 25 to 90%RH at 25°C (77°F)
Humidity Resolution : 1% RH
Barometric Pressure measurement
Pressure measuring range : 795 to 1050mb / hPa
(23.48 to 31.01 inHg)
Power
Main unit : uses four (4) UM-3 or "AA"
1.5V batteries
Remote sensing unit : uses two (2) UM-3 or "AA"
1.5V batteries
Weight
Main unit : 10.6 oz (30 g)
(without battery)
Remote sensing unit : 2.8 oz (80 g)
(without battery)
Dimensions
Main unit : 7.68 x 4.13 x 3.03 inches or
195 (L) x 105 (W) x 77 (T) mm