GETTING STARTED
ADAPTER
Plug adapter into main unit. Make sure the adapter
socket is easily accessible to the unit.
shows when the adapter is not connected.
NOTE This product may malfunction when radio
interference appears on the AC power line. The unit will
revert to normal operation when interference stops.
BATTERIES
Insert the batteries, matching the polarities (+/-) as
shown.
shows when the battery is low.
UNIT
LOCATION
Main Weather forecast area
Remote Temperature area
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment.
2. Insert battery, matching the polarity (+ / -).
3. Select a channel, then press
RESET.
4. Close the battery door.
To Next Page
Loading...
